FS100 One-component colored polyurea waterproof adhesive

FS100 One-component colored polyurea waterproof adhesive

This product is a high-solid, single-component, color-adjustable polyurea waterproof adhesive that meets the Type II standard of JC/T 2435-2018.
More Details

Property

■ Excellent tensile elongation and tensile strength.

■ Excellent waterproofing and decorative functions.

■ Easy to apply, filling gaps.

■ Can be thinned for spray application.

■ The product is tintable.

■Weather resistance: >8 years

 

Applications

Mainly used for waterproof repair of exterior walls of buildings, and can also be used for waterproof construction of open-air balconies and corridors.

 

Physical parameters

Colour:                  Adjustable-color liquid, typically gray/black/white 

Weight solid fraction:               ≥85%

Flash point (℃)                     ≥60

Viscosity:                                      1000-2000 CPS(25℃)

Specific Gravity:                         1.0±0.05g/cm3

Gloss:                                            High gloss 

Suggested usage amount:    0.25-0.45KG/m2

 

Index

Elongation :                           250-350%

Tensile strength:                     25-35MPa

Adhesion(concrete):         ≥2.5 MPa or substrate failure                   

 

Construction parameters

Construction time available:

temperature(℃)

25

use period(min)

20~30

 

Construction conditions:

Ambient temperature:           10℃-30℃

ambient humidity:                  ≤85%

Substrate temperature:         Must be greater than the air dew point temperature of 3℃ or more

Construction method:           Roller coating / Spray application

Cleaning agent:                       Supporting standard/self-made environmentally friendly diluent

Drying time and coating interval:

temperature(℃)

25

dry to touch(hrs)

1.5

hard drying time(hrs)

5

Construction interval(hrs)

5-8

The provided data is for guidance only.  The actual drying time/paint application interval may vary and can be longer or shorter, depending on factors such as film thickness, ventilation conditions, humidity, underlying paint, and the need for early loading and unloading.

 

Surface Preparation

Rinse off salts and other water-soluble impurities with clean water.

Remove grease with appropriate cleaners and degreasers.

Ensure the surface is clean and dry before construction.

Pay attention to the interval between the application of the primer and the topcoat.

 

Storage

 Storage time:         Paint: 1 year,       

Storage temperature:  0℃-30℃.

 

PACKING

Paint: 5/10KG   

 

Safety Measures

  1. Avoid contact with skin and eyes.
  2. If paint comes into contact with the skin, wash with an appropriate detergent.If paint comes into contact with the eyes, rinse with plenty of water and seek medical attention immediately.
  3. Ensure good ventilation at the construction site.
  4. The paint contains flammable substances; keep away from sparks and prohibit    
  5. Smoking in the vicinity of the work area.
  6. Comply with all health and safety regulations on site.

 

Declaration

The information provided in this product manual is based entirely on data obtained from our laboratory and practical experience.  However, as the actual use of the product is usually beyond our control, we only guarantee the quality of the product itself.  We reserve the right to modify this manual without prior notice.